Your vehicle must be in Park. Turn on your vehicle and Radio/SYNC. Press the Phone button. Phone menu displays. Press Arrows until Vehicle Health displays. Press OK. Press Arrows until User Preferences displays. Press OK. Press Arrows until Automatic Reports displays. The handbrake light will turn on when engaged and off once you release the handbrake. However, you may see the "Check Brake System" when the handbrake releases partially or fails to disengage. When you disengage the handbrake, it should fully lower down. It may cause pressure on the handbrake if it's not lowered. Do not reset the fuel cut-off switch if you see or smell leaking fuel. • Turn the ignition switch to position 0. • Check fuel system for leaks. • If no fuel leak is apparent, reset the switch by pushing in the button (see illustration). • Turn the ignition switch to position II. After a few seconds return the key to position I. • Make Ford. Focus Electric. 2012. The first method you should try if you're trying to get the engine management light off on your Ford Focus is to turn the vehicle off and on a few times. First put the key in the ignition and then move it from off in to the run position and then wait 1 to 2 seconds. Repeat this three times in a row. A full day of hard work requires a battery that can keep up. That’s why the F-150 has a built-in Battery Management System to preserve battery power when the engine is off. You have the ability to use electronic accessories without the worry of your vehicle running out of juice. Watch the video below to learn more. Randomly, however, I get the 'Service Advance Trac / Hill Descent Control Fault Warning / Pre-Collision Unavailable / Hill Start Assist Warning' messages. Sometimes, it's after a few miles pulling out of a parking lot, other times it's in the worst of places (7% down grade towing a 12,000lb. 5th Wheel). Step 4. Now that you’ve reset the code system start by pressing the first button that’s labeled 1-2 and then wait five seconds and then press them again to enter your new code. There should be a five-second gap between the doors locking and unlocking to indicate the process is finished and successful. Vehicles equipped with a Power button. Press and hold both the Power button (center of the volume knob) and the Seek Right button for 10 seconds. The display will indicate when the module is resetting. You may then release the buttons. *U.S. model shown. Your Ford MyKey ® can control many different settings depending on the Ford model you drive and the SYNC ® technology you use. Some features include: Top Speed Restrictions: You can limit your Ford to max out at 65, 70, 75 or 80 mph, and this system will chime reminders to slow down at 45, 55 and 65 mph. Belt-Minder ®: This system reminds 5. Name: Sasha. Ford Model: Focus mk3 1.6TDCi. Ford Year: 2014. UK/Ireland Location: Other/NonUK. Posted August 31, 2020. I still have a factory battery (2014.), and my start-stop works ok. But, if AC is working , outside is too hot, or i have under 1/4 diesel, or something like that, it will not work. My battery is always 60-70% full. y9PwCyD.